Hydrosana USA HomeHow Hydrosana WorksHydrosana for Residential UseHydrosana for Commercial UseHydrosana for Agricultural UseHydrosana Installing InformationFAQs About HydrosanaDownsides to HydrosanaContact Hydrosana USAOrder Hydrosana
 
 


HOW IT WORKS

The Hydrosana is a dual action conditioner. By passing a small electric current through the water HydroSana eliminates the cohesion that exists between the mineral particles in the water, lowering the surface tension of the water. Evidence of this mineral separation is clearly visible in the microscope photographs below.



Before


After


Electron microscope photographs - 1440x
The microscope photographs above reveal the mineral particles precipitated from "the same water sample" with a reading of 750 mg/l hardness.

NOTE how the mineral particles and salts are bound together before HydroSana water treatment and are "separated" after treatment.

This current also changes the physical properties of the water by transforming calcium carbonate into aragonite. Calcium carbonate is the main component of the scale that forms in your pipes and on your shower head, faucets and valves.

Aragonite has the same chemical structure as calcium carbonate but it doesn't build up like calcium carbonate does. It dissolves existing scale then it forms a coating of Aragonite and stops. This coating protects your pipes from scale and corrosion.

The second action is turbulence. The hydrosana is designed to speed up the water flow and drive it through a tortuous path to create turbulence. This process releases dissolved gasses like chlorine, and sulfur. It also releases contaminants like gasoline and radon.

These gasses can be vented or they naturally flow into the air when your tap is opened. For this reason, be sure to use the smallest Hydrosana that will provide adequate flow for your location. Oversizing slows the water and reduces the ability to release gasses.


Cross section of a HydroSana Water Treatment System

For optimum performance:

•  Separate earth grounding of the conditioner casing is essential.
•  Size according to recommended flow rates and do not oversize.
•  Clean the inner chamber and fins when necessary.

 



WHAT IT DOES

- Lower the surface tension of water.

- Change the physical composition
of scale forming minerals.

-
Remove gases from your water
(including radon,chlorine, & sulfur)



 



SIMPLE, SAFE, ECONOMICAL

HydroSana is a non-chemical water treatment system. The system's housing consists of a brass casing containing a non-ferrous, special alloy forged into curved multiple venturi passageways. This alloy is composed of different precious and semi-precious metals that, together make the cores extremely hard and highly resistant to corrosion. The system is installed into the water line. It is so designed that when water passes rapidly through the chamber, electrons are induced into the water. These electrons cause changes to the behavior of the minerals and salts in the water, which not only improves your supply but eliminates many water problems.

Once your HydroSana Water Treatment System is installed you can almost forget about it, because it is almost maintenance free. What's more, it will deliver a continuous supply of water, and there are no moving parts to wear out. Furthermore, HydroSana Treatment Systems require no salt and there are no messy cartridges to replace or worry about.

This simple, HydroSana process, will treat your water for a lifetime ... for a lifetime of savings.

     
     
 
     
untitled

Copyright 2007 HydroSanaUSA. All Rights Reserved.
Site Design by Surf4 Design Group. Hosted by Surf4.net